Cortical Cannulated Screw 4.5mm (Fully Threaded)

SCI-314 (Stainless Steel)
SCI-314T (Titanium)


  • Thread Diameter : 4.5mm
  • Drill Bit for Threaded Hole : 3.2mm
  • Core Diamater : 2.7mm
  • Hexagonal Socket : 3.5mm
  • Head Diameter : 6.5mm
  • Cannulation : 1.75mm
  • Guide Wire : 1.6mm Drill Bit for Glinding Hole 4.5mm
Stainless Steel
Cat No. Length
SCI-314-20 20mm
SCI-314-22 22mm
SCI-314-24 24mm
SCI-314-26 26mm
SCI-314-28 28mm
SCI-314-30 30mm
SCI-314-32 32mm
SCI-314-34 34mm
SCI-314-36 36mm
SCI-314-38 38mm
SCI-314-40 40mm
SCI-314-45 45mm
SCI-314-50 50mm
SCI-314-55 55mm
SCI-314-60 60mm
SCI-314-65 65mm
SCI-314-70 70mm
Cat No. Length
SCI-314T-20 20mm
SCI-314T-22 22mm
SCI-314T-24 24mm
SCI-314T-26 26mm
SCI-314T-28 28mm
SCI-314T-30 30mm
SCI-314T-32 32mm
SCI-314T-34 34mm
SCI-314T-36 36mm
SCI-314T-38 38mm
SCI-314T-40 40mm
SCI-314T-45 45mm
SCI-314T-50 50mm
SCI-314T-55 55mm
SCI-314T-60 60mm
SCI-314T-65 65mm
SCI-314T-70 70mm


Shagun Cares® Cortical Cannulated Screw 4.5mm (Fully Threaded) Specification:

  • Screw available lengths are 20mm, 22mm, 24mm, 26mm, 28mm, 30mm, 32mm, 34mm, 36mm, 38mm, 40mm, 45mm,  50mm, 55mm, 60mm, 65mm, 70mm, 75mm and 80mm
  • Cannulated Screw has Cancellous thread. Cancellous thread profile uses deep cutting threads with a large pitch to increase resistance to pullout. Large pitch also accelerates screw insertion and removal.
  • They are made from pure Titanium and SS 316L.
  • Any additional length sizes of this screw will be made on demand.
  • This is Self Tapping Screw. Self Tapping Screws cuts its own thread while being driven into the bone. It makes a small hole while entering the bone which creates a tight friction fit between the threads. This helps fight vibration loosening and allows the parts to be taken apart if needed..
  • Instruments are available for this screw such as Bone Taps, Combined Drill & Tap Sleeve, Counter Sink, Depth Gauge, Drill Bits, Drill Guide, Drill Sleeve, Hollow Mill Screw Removal, Reverse Measuring Device, Screw Drivers and Screw Holding Forceps etc.

Cortical Cannulated Screw 4.5mm (Fully Threaded) uses:

These screws are intended for fixation of fractures, fusions, and osteotomies of Small and large bones appropriate for the size of the device.

Cannulated screw have a hollow central shaft. Both cortical and cancellous screws can be cannulated. Cannulated cancellous screws are used for metaphyseal fractures while cannulated and noncannulated cortical screws are used as lag screws for fixation of diaphyseal fractures.

Partially threaded screws may be used to lag one bone fragment to another, where the bone fragment is captured by the threads of the screw and pulled toward the near cortex fragment on the head side of the screw. Fully threaded screws are intended to be used to stabilize fractures with little to no compression across the fracture.

This system provide emergency closed reduction, percutaneous screw fixation and excellent stability.

Cannulated bone screws in comparation with traditional screws decrease surgical time, allow more precise screw placement and reduce possibility of errors.

One special type of cannulated  is the Knowles pin which is a Cannulated screws used for fixation of slipped capital femoral epiphysis in children.


There are no reviews yet.

Be the first to review “Cortical Cannulated Screw 4.5mm (Fully Threaded)”